Re: BEFW11S4 Power Supply
Hi Conor, it's actually important that you use the correct power supply for each device. In fact different versions of the same model have different power specs. Version 4 has 12V AC, 1A and it cannot...
View ArticleRe: can no longer login to ea3500 via ANY ROUTE - final analysis, temperature
If the device is actually still under warranty, you may look into having it replaced. You may just have gotten a bad one.
View ArticleRe: E1200 Client ID Not Showing in DHCP Client Table
I held the button on the back down to 30 seconds. Then turned it off for awhile,. Then turned it back on. All devices reconnected immediately, no passwords or anything needed reset. Is that it? What...
View ArticleRe: EA6500 New firmware: : 1.1.28.147876
Very odd stuff... I updated to this firmware about a week or so ago. Today my network is down and I can't ping the router (normally at 10.0.0.1). Do a release/renew and get a 192.168.1.x IP address and...
View ArticleError Message 2123 on EA6900
i continue to get error message 2123, especially when trying to save media prioritization. below is more detail. ttp://linksys.com/jnap/core/Transaction -- {} -- Status: 200 OK Date: Fri, 24 Jan 2014...
View ArticleEA3500 Issues
Hi, I have bought a EA3500 to replace my WRT54G. I have setup my PPPOE WAN connection as my ISP instructed, the same settings I used on my WRT54G. My LAN is set to default DHCP. Anyway, when my WAN...
View ArticleRe: 4200 drops connection
Good thing that the ISP found out the root cause of the whole thing and made some changes. Glad to hear that it's working now. I understand your point of wanting to know the real reason but at least...
View ArticleClik here to view.
Re: E1200 Client ID Not Showing in DHCP Client Table
Doing a firmware update requires a reset the way I have described it. Resetting it will bring back the device to the default settings thus resetting it from scratch is the necessary, too. The reset...
View ArticleRe: Connect PC via bridge to internet
I see. Yes, you may follow the suggestion of chadster and put your feedback here after. Thanks for sharing zumby13:smileywink:
View ArticleRe: EA3500 Issues
Hi barbs706, there is a possibility that the modem and the router have the same IP address thus there is an IP conflict. I suggest that you change the local IP address of the router to 192.168.2.1 If...
View ArticleRe: EA6500 Loosing internet connection
Hi pkk888. Have you checked your internet connection directly to your modem? If yes, what IP address are your getting behind the modem?
View ArticleRe: EA6500 New firmware: : 1.1.28.147876
The router issues all my IP addresses, and it is only me and my partner in my house so I doubt it's an IP address conflict causing the reboots/wireless drops.
View ArticleNetwork in a network
I have:Cable ConnectionCisco 870 wired router - IP address is 192.168.1.1Off a port on the wired router, I run to an EA3500. IP address is 192.168.1.2 It works, but is a bit spooky. The cable from the...
View ArticleRe: WRT54GS sees neighbor's DVRs as DHCP clients
Hi AlanMintaka, deleteing them may disconnect them since they will not receive any IP address from the router. However, there are a lot of tools that will reveal your password. So I would suggest you...
View ArticleRe: WRT54GS sees neighbor's DVRs as DHCP clients
Hi Sarah, Thanks for the detailed info! That's the kind of stuff I need to get restarted with this router. It's getting tougher and tougher to service these Linksys "Legacy" routers, but alas, I just...
View ArticleRe: WRT54GS sees neighbor's DVRs as DHCP clients
Those neighbor devices most likely aren't coming through your wireless. They're coming through your cable. It's not the first time I've heard of this. I've heard of people being able to see their...
View ArticleRe: E1500 Router suddenly slow
It seems that all of my wireless devices are slow when connected to this router. The other day, I went to my friend's house and connected to his wireless router (I'm not sure of the model), but things...
View ArticleRe: EA3500 Issues
Did you change your MTU to 1492 on the linksys? If not, access the settings on ea3500 and change MTU from auto to 1492.
View Article