Re: EA6900 router IP reverts back to original
What is it connected to on the wan side? What firmware version are you using?
View ArticleRe: uTorrent speed reduce after changing to EA6900
I too have this problem in my house. I have 1 gigabit internet and torrents crawl between 10kb-1mb (max) - I should be getting at least 10mb a second. I have port forwarding setup.
View ArticleRe: E1500 suddenly not accepting new wifi clients, and no access to admin...
H/W version: How do i get it? i couldn't find it on the web UI, the sticker on the back of the router says 'Model No:E1500'F/W version: 1.0.06 build 1 I'm located in IsraelFactory reset has not been...
View ArticleRe: Unable to connect to device connected to non 5G network and 5G network
There should be any change in putting one device on 2.4Ghz and the other on 5Ghz. Only how you connect to each device would be an issue. We've confirmed that devices do connect between 2.4Ghz and 5Ghz...
View ArticleWRT1900AC Intermittant internet connection
When attempting to access a web site with Windows 8.1 and IE11, I get a timeout. Then run Network DIagnostics and the website comes up. If I have a VPN session open and attempt to access a web site,...
View ArticleRe: EA6900 router IP reverts back to original
Version 1.1.42.161129 It is connected to a cable modem. The cable modem is in bridged mode handing off the public IP address to the router. Seems like the IP it reverts to is a different address...
View ArticleRe: uTorrent speed reduce after changing to EA6900
You may need to adjust the connections and flow on the seeds incomming and out going as well. Torrents are bandwidth hogs and the Torrent program should be adjusted for a balance flow.
View ArticleRe: WRT1900AC Intermittant internet connection
What Firmware version is currently loaded? Found on the routers web page under status.What region are you located?Has a Factory Reset been performed?Was a Factory Reset performed before and after any...
View ArticleRe: E1500 suddenly not accepting new wifi clients, and no access to admin...
Try single mode G or N or mixed G and N..Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. If you do have WiFi...
View ArticleRe: EA6900 router IP reverts back to original
Give this a try...I recommend doing the following:1. Save router config to file first using IE or FF with all security add-ons disabled.2. Factory reset the router with all other devices disconnected...
View ArticleRe: WRT1900AC Intermittant internet connection
Don't have access to the router until this evening but:Firmware is the latest, I think from Mid July.Located in Southern CalNo factory resetRouter was working before firmware update.Download is 100...
View ArticleRe: EA6200 in Bridge Mode Slow Wireless Speeds
Thanks for the input. Below is a little more information about my setup. Host Router = Asus RT-AC68U2.4Ghz Mixed with open channel specified and set at 20Mhz5Ghz Mixed with open channel specified and...
View ArticleEA6500 - Static IP routing for LAN
Hello, I would like to know how to setup STATIC IP on my local network.I got 5 Public Static IP address from Comcast. I can only use "DHCP" for lan. I can't see option to setup STATIC IP on my lan. I...
View ArticleRe: EA6200 in Bridge Mode Slow Wireless Speeds
Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz on the main host router?Channel Width set for Auto 20/40Mhz. 20Mhz can slow the wireless speeds down.Try setting a...
View ArticleRe: EA6500 - Static IP routing for LAN
Not sure if this will be of any help:http://community.linksys.com/t5/Cable-and-DSL/WAG160N-amp-WRP400-wireless-help/m-p/380311?comm_cc=HSus&comm_lang=en#380247
View ArticleClik here to view.
Re: Unable to connect to device connected to non 5G network and 5G network
Tried this, I do see differences in the behaviour of page loading. Certain settings result in an immediate presentation of a failure page but other settings result is a lengthy try to reach the page...
View ArticleClik here to view.
Re: Unable to connect to device connected to non 5G network and 5G network
I recommend that you phone contact your regional Linksys support office and ask for help and information regarding this. Or LinksysCares@linksys.comLet us know how it goes please. soverbosch...
View ArticleRe: A Couple of WRT1900AC Problems
getting a bridge will not solve the problem . The firmware of the 360 ethernet module needs to be updated as it is tied to both wired and wireless So by leaving router set to auto and using a wired...
View Article