Re: WAP300N crashing network connection
Thanks.Setting the router's channel to 11 (instead of auto) solved half of the problem. Now the AP and the router can coexist.However, the modem does not want to play. As soon as the AP is turned on...
View ArticleE2500 wireless router dropping wifi connections
I installed an E2500 wifi router about 2 weeks ago. It is constantly dropping connections. Is there a list of special configurations and/or tunings that I can apply to this router to make it...
View ArticleUnistalled Cisco Connect now router password no recognized
I uninstalled Cisco Connect and now I cannot log into my wifi router. The password is not recognized. Do I have to reset the entire router configuration????
View ArticleRe: WAG160N - booting up problem
What wireless modes are you using?2.4Ghz Routers only: Try single mode G or N or mixed G and N?Channel Width set for Auto 20/40Mhz or try 20Mhz only.Try setting a manual Channel to a open or unused...
View ArticleRe: WAP300N crashing network connection
Can you disable or turn OFF the WiFi on the ISP modem?
View ArticleRe: E2500 wireless router dropping wifi connections
What Firmware version is currently loaded? Found on the routers web page under status.What region are you located?Internet Service Provider and Modem ConfigurationsWhat ISP Service do you have? Cable...
View ArticleRe: WAP300N crashing network connection
try disabling the router and wifi and then change the channels.
View ArticleRe: Unistalled Cisco Connect now router password no recognized
Check the PW for blank. It may have reverted back to being blank.
View ArticleRe: Unistalled Cisco Connect now router password no recognized
a reset would do the trick.
View ArticleRe: Unistalled Cisco Connect now router password no recognized
A blank pw also worked, but did a full reset. Lucky that I remembered how to change the IP address. Thanks to furryNutz and helpfulguy.
View ArticleRe: WRT160N v3 Firmware update
THANK YOU! I will check it out and let you know. Really appreciate the sage advice. Have a great evening! S, TK
View ArticleRe: E2500 wireless router dropping wifi connections
Quick update. I had to order the longer ethernet cables from Newegg. Since resetting the router to factory settings and then letting Cisco Connect do the initial config followed by my manual config,...
View ArticleGuest network WRT 1900AC
To set up working guest access behind a FIOS or Comcast router requires setting the WRT 1900 Internet port to use a fixed IP address. The FIOS or Comcast router is directly Internet connected and sets...
View ArticleRe: Unable to connect to device connected to non 5G network and 5G network
If I indeed connect my mac to the non 5G network then I am able to connect to my HTPC which is also on the non 5G network. But not able to connect from 5G network to device connected to non 5G network....
View ArticleAC1600/EA6400 - Media Prioritisation Issue
Hi, I had an EA2700 and used the media prioritisation feature as I generate a couple of icecast2 streams on port 8000 (1 x 128kbs and 1 x 64 kbs) from within my network. We are "out in the sticks" and...
View ArticleRe: WRT1900AC - Sudden Disconnects
Get a refund, move on. They will not admit it's their "widespread" problem. It's always something else. Some people write a page and a half about all the stuff you NEED to do when what you had worked...
View ArticleEA6900 router IP reverts back to original
I have an EA6900 who's IP address changes every few weeks back to the orginal 10.x.x.x network. From the initial setup it was reconfigured to a192.168.x.x and we have a several devices with static...
View Article