Clik here to view.
how to totaly remove wrt1900ac smart wifi
how do i totaly remove wrt1900ac smart wifi for the classic old style wrt? many can agree with me that we are used to the classic set up pages over the years wrt54g v.2 you could even do it on...
View ArticleRe: Smart Wi-Fi ports
My firewall shows. 50.18.204.187:5230. I have two wires running from my firewall to WRT1900ac:One to the Internet port, that is allow WRT1900ac to contact Belkin/Linksys Command and Control. - I...
View ArticleRe: A Couple of WRT1900AC Problems
Was having same problems on a buffalo g450h router kept getting disconnected wired or wireless So got the wrt1900ac thinking that would solve problem Nope .Did the 2.4 b/g only AND used the mac address...
View ArticleRe: WRT1900 and L2TP internet connection
Trying to understand... If L2TP is used to connect via a tunnel to your ISP, how will it use your ISP for its DNS look up, that is to travel through the tunnel that is not open yet? I can understand...
View ArticleRe: connecting W#RT1900AC to AT&T VDSL 5301NV router/gateway
I have used the DMZplus mode and also forwarded the DVR ports 9000 85 and 18004 and used the release and renew function to get the camera system working but the 5031NV Router Gateway is being...
View ArticleRe: how to totaly remove wrt1900ac smart wifi
You can't. They changed the style completely. Even when you manage it locally from 192.168.1.1 I personally continue to use my router that way and refuse to use Smart Wifi. That is for folks that know...
View ArticleRe: A Couple of WRT1900AC Problems
It works fine with the slim on 2.4GHz. Use the following. If you have any G devices. You seriously need to upgrade. 2.4GHzN onlyChannel Width: 20MHz onlyChannel: Auto or 1, 6, 11
View ArticleRe: WRT1900AC wireless devices AC and N
I thought it was like the old 2.4GHz. When you have G and N devices mixed. It defaults to G with all devices. Which is why I asked about this with AC and N together. Thanks for the responses.
View ArticleRe: A Couple of WRT1900AC Problems
Both my Slim Xbox 360's still can't connect on the 2.4GHz band. My throughput is horrible on the 2.4GHz band for me. I use the WRT1900AC for 5GHz band only and another AP for my 2.4GHz clients.
View ArticleRe: A Couple of WRT1900AC Problems
FurryNutz wrote:sm00thpapa wrote:FurryNutz wrote:sm00thpapa wrote:I have 2 Gears of War 3 edition Xbox Slims which I beleive was the lastest edition slim. Both have an issue with connecting. I also...
View ArticleRe: WTR56G router passphrase
paulr56 wrote:I recently found out my network passphrse has been compromised. I can't find the install CD. Is there any way to change the network passphrase without this. I have had this router for...
View ArticleRe: It reset to factory default after turning off and on.
thanks for your suggestions, I will keep monitoring the router if it will back on default settings because of power failure.
View ArticleRe: Linksys EA-SERIES
Hopefully you should be able to get it going then. Then give the mobile device a test before the Laptop leaves.
View ArticleEa3500 vs ea4500
Has anyone upgraded from an EA3500 to a ea4500 and noticed a decent improvement in range? I like the EA3500's throughput, but would like just a little better coverage. Thanks!
View ArticleClik here to view.
Re: Ea3500 vs ea4500
Haven’t used an EA3500 or EA4500 ever since. But I did an upgrade to my network before, from E2500 to EA6300. From then on, everything worked perfectly. You might want to check the new Linksys Smart...
View ArticleRe: WRT1900ac: Defects, Issues and Other
jackb_guppy wrote:It is not enabled on either 2.4 nor 5Ghz. Is there a list of hidden webpages in the Linksys WRT1900ac router?I got around to doing some more testing on the AP Isolation issue and...
View ArticleRe: WRT1900ac: Defects, Issues and Other
I looks like with firmware version 1.1.8.161917 does properly check for new firmware updates when the router is in Bridge Mode. I can't be sure but the below is what the messages log show (sysinfo.cgi)...
View ArticleClik here to view.
Re: E4200 V2 HELP!
Hmm, that’s a very unfortunate experience you had with support @jmmathe. This link might help.
View Article