Re: WRT1900AC web page bug?
Furry, when you follow those exact steps, it will allow you to set it up as an access point and works well... except for the config page.The internet connectivity on the initial config page shows as...
View ArticleRe: EA6200 does not load certain webpages
Downstream Sync Rate (kbps) 11998Upstream Sync Rate (kbps) 1021
View ArticleRe: Nexus 7 Tablet & Linksys WRT120N
Seems like a configuration issue with Mac Filtering and this device. You may need to not use Mac Filtering. Reserving an IP address means that when you configure the router to reserve and IP address...
View ArticleRe: EA6200 does not load certain webpages
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.If the ISP...
View ArticleRe: WRT1900AC web page bug?
Thats a given when running any router in AP mode. The FW update check requires the use of the WAN port. Doesn't mean that the router still can't be updated manually.
View ArticleRe: WRT1900AC: Port Forwarding causes router to become unresponsive.
Nice! So that means port 53 is causing this. Never thought of that. Thanks to Sparksman23.
View ArticleClik here to view.
My first week with the Linksys WRT1900AC
Purchased on 7-21-2014. Here is how my current network looks. Service: Charter cable 100mb/5mbModem: Motorola SB6141Router: Linksys WRT1900AC Devices & Band Usage Desktop (wired)Desktop (wireless)...
View ArticleEA6900 Help...
Dear Sir:I would like to buy the model of Linksys EA6900 and its SPEC. as following: Operating frequency2412-2472 MHz and5180-5240 MHz Due to the restriction for use the frequency of 5180-5240MHz in...
View ArticleRe: My first week with the Linksys WRT1900AC
SB 6180 page generated on Tue Jul 29 04:36:34 UTC 2014 UpTime: 04:36:34 up 19 days, 23:46, load average: 2.12, 2.02, 1.98 Vendor: LINKSYSModelName: WRT1900AC Firmware Version: 1.1.8.161917
View ArticleRe: WRT1900AC web page bug?
Furrynutz - It is not. It is this SMART-ROUTER junk of Linksys, that breaks good hardware with weak software. Leaves user's networks open by keeping the routers attached to Linksys's (Amazon Cloud)...
View ArticleRe: WRT1900AC web page bug?
Well you can believe that...most routers are not really meant to be stand alone AP.s. Just seems like your trying to use the router for what it wasn't designed for...thats ok though. Good Luck.
View ArticleRe: EA6200 does not load certain webpages
I believe the NVG510 is a gateway(modem-router). You can try Furry's suggestion. But I would also suggest that you ask your ISP to set the modem to bridge mode. This is to avoid conflicts with the new...
View ArticleRe: Router can't find xbox one?
Is the xbox connecting to your routers SSID? Be sure to change the SSID on the router to something unique.Do you see the xbox on the router when hard wired LAN connected? If you can fill in the...
View ArticleRe: wrt1900ac router kicking me off 5 ghz
Fuzzy: TY for the suggestions. One source of interference I had not considered is the wireless phone system which has been around this house so long that I forgot about it. It has not been set up to...
View ArticleRe: wrt1900ac router kicking me off 5 ghz
Im currently using Auto mode on 5Ghz, WPA2 only and manual channel 149. You can test single mode N and see if that changes anything. Yes, other radio signal in range of 2.4 or %Ghz can be a source of...
View ArticleRe: My first week with the Linksys WRT1900AC
This will really inspire a lot of users. Thank you for sharing this, marctronixx!
View ArticleRe: Unable to Access Routers Remotely.
This is super annoying to me. Why not put in a way to allow to remote access manually, like through WAN ip and a port?
View ArticleRe: Unable to Access Routers Remotely.
They chose to use this Smart WiFi servcies instead I guess.
View ArticleRe: WRT1900AC and OpenWrt
Oh please Chadster! Linksys/Belkin may be listening, but they aren't doing much of anything to live up to the marketing promises made at the release of this product. I've been pretty patient and...
View Article