Re: It reset to factory default after turning off and on.
I guess there is no method at all, as when the router has been reset, it returns to its default settings. I tried to intentionally reset the router by disconnecting the power cord two times but it...
View ArticleRe: Smart Wi-Fi not not supported with IE 11?
Now all they need to do is a firmware upgrade for local router access via IE11 (probably never!)
View ArticleE1200 router won't let linux box with static IP access the internet?
I don't believe the linux box is the problem. I can ping it, I can access it through SSH,etc For the like of me I can't figure out how to get it to access the net. This is necessary for remote access....
View ArticleRe: No access to internet after changing from Gateway to Router mode
How about cascading the routers via LAN to LAN connection? This is if you want both networks to communicate with each other. To guide you, follow the steps from here:...
View ArticleRe: Unable to Access Routers Remotely.
Agree. However, Linksys normally provide any notifications and details before any scheduled maintenance or outage. By the way, can you access http://www.linksyssmartwifi.com/?
View ArticleRe: WRT1900AC web page bug?
There is also a bug if the router is used as an access point (with another router as DHCP), you cannot use the check for update link to check for new firmware. So I doubt it would automatically...
View ArticleRe: wrt1900ac unable to remote control/configure
I agree with bigdave240. About using the new account, you will need to Associate it with you router again like the first time. If the Linksys Smart WiFi is down, you may need to wait until it is back...
View ArticleRe: wrt160n v3 - dead?
The same scenario has happened to me too. Do you have internet directly to the modem? If yes, reset the router again for 30 seconds, then power cycle it. Make sure that the only device connected to the...
View ArticleClik here to view.
Re: Smart Wi-Fi not not supported with IE 11?
Hmm, not working here yet. Both local IP and www.linksyssmartwifi.com still render as "Browser not supported". I know it's not a cached page issue causing this. Curious...
View ArticleRe: It reset to factory default after turning off and on.
Disconnecting the power cord should just restart the device. If it is returning back to its default settings, then, ching_pamz13 could be correct. Is your firmware updated? Are you using a power surge...
View ArticleRe: Smart Wi-Fi not not supported with IE 11?
I had the same problem, I rolled back the firmware on my router and now have access with IE 11.
View ArticleRe: Smart Wi-Fi not not supported with IE 11?
@Larryob, are you accessing locally to the Linksys Smart WiFi page of your router? I've tried but I still get the same compatibility error.
View ArticleRe: Smart Wi-Fi not not supported with IE 11?
I was not able to access by local access or the web, I have been using IE 11 since I purchased the router with no problem, but a firmware updat from version 1... to version 2... killed my access.
View ArticleNexus 7 Tablet & Linksys WRT120N
I have a Nexus 7 32Gb LTE tablet which, up until this week, has connected to home wi-fi through Linksys wrt120n where it was listed, along with a household laptop and other devices, in the enabled...
View ArticleRe: Nexus 7 Tablet & Linksys WRT120N
Have you set up Reserved IP addresses for each device ON the router, then set up and configure Mac Filtering?
View ArticleRe: EA4500 "Waiting.." forever when login
Well it appears that my EA4500 is out of warranty.I just spent 20 minutes on the phone with support after doing the hokey pokey - plug in/unplug 4x and reset.Still no go. Support told me to buy a new...
View ArticleRe: Nexus 7 Tablet & Linksys WRT120N
Uncertain of what you mean by reserve IP address. I have not in the past reserved IP for any of my devices, and they continue to work, all except the Nexus tablet recently. I just entered DHCP Server...
View ArticleRe: WRT1900AC web page bug?
You are correct. This system is built to be directly connected to the internet. I have mine filtered through a firewall. I tried to block it access, but found that it starts to pound the firewall...
View ArticleRe: WRT1900AC web page bug?
jackb_guppy wrote:You are correct. This system is built to be directly connected to the internet. I have mine filtered through a firewall. I tried to block it access, but found that it starts to...
View ArticleRe: EA6200 does not load certain webpages
What Firmware version is currently loaded? 1.1.41.153743What region are you located?...
View Article