Just taking a few guesses here, do you see any unknown devices on the page(s) of the map, or do any showing devices have additional IP addresses that they shouldn't?
↧
Re: Connecting Echo Dot To Network
↧
Re: 2118 Error Haunts Me Again/From EA7500/Now EA9300
Not sure what anyone contributes to these forums but I will contribute my findings.
The "2118" error on my original EA7500 V1 was passed off by sending me a very newly released EA9300 V1. The new EA9300 V1 now exhibits the same "2118" error when IPv6 is enabled in the router settings. The EA9400 V1 and EA9500 V1/V1.1 which are older models had the "2118" error corrected in the supplied firmware as noted in those devices release notes. Yet they release a newer device and fail to code the firmware properly and reintroducing the error all over again on a newly released device. Yes the EA9300 V1 is newer than the EA9400 and EA9500.
To the consumer this has been filed also with the FCC. These products are expensive and we all deserve a working product with improvements made based on past issues. I will never give up to correct a wrong. It takes time for discovery to find the facts. The 2118 error has in fact never been corrected in some prior devices. Most current 2118 errors are in relation to the IPV6 being in a ON state leaving us without access to settings without jumping through hoops to change settings properly.
I am sure for those with this issue on the EA7500 V1, possibly EA7500 V2, and now the EA9300 V1 we will be getting a fix soon. What ever happened to sharing knowledge in forums? Share people! I know there is someone here that knew about all this to begin with. Cheers!
↧
↧
WRT1900acs v2 some options are missing......
I bought a brand new WRT1900acs V2 wireless router with firmware version 2.0.1.177097 three months ago and I'm recently find something abnormal when i try to upgrade system firmware.
Steps are as follows:
first, i go to "connectivity" and then click "Basic" tab, then i got options are displays like this:
obviously, firmware upload options are missing, i cant find "choose file" and "upload" button when i try to upgrade my router manually.
Then i go to "troubleshooting" and click "Diagnostics" tab, options are displays as follows:
Some options such as "backup" "restore" and "reset to factory default" are all missing.
Please help me to figure out why, i was done something like press hardware reset button to make my router back to factory default but issues still resist.
Dose anybody have any ideas?
Many Many thanks for your help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
↧
WRT1200AC all LED blinking simultaneously
Hi All,
I've got a brand new WRT1200AC router. I was able to setup the router easily however, an hour later I noticed a strange behavior: all LED started blinking simultaneously and I could loose the comms.
I did restart the router and it worked again for 2 hours then the same story repeated.
Is there any solution for this problem?
PS: The router is running the latest stock firmware.
Thanks in advance
↧
LAPN600 unstable over time
Firmware: V1.1.00.002
I have a lot of LAPN600 APs deployed in my organization, and have had some struggles with them.
After being online for a long period (months), some APs wil lock up on slow speeds, and will refuse to give the users high speeds until the AP is rebooted. If you go in to Wireless clients view, you can see that all connected pcs have been given the same cap on the link rate.
That, as i already mentioned is fixed by rebooting.
↧
↧
Re: WRT1900acs v2 some options are missing......
Try logging out of the router then log in using the local login link. You should only need your password to do this then see if you have the options you need
↧
Re: Configuring e1200 as wireless bridge
I found ths old thread which has not clearified anything.
I have a Linksys EA2700 as main router.
I want to put another router on the other floor of the building to extend Ethernet and Wireless.
I want to buy E1200 to act in Bridge mode. (and connect to EA2700 with ethernet cable)
As I understand it will delegate everything about Ethernet addresses to main EA2700 router.
And it will make another Wireless connection of its own (it's fine by me), which would get the addresses from the ES2700 main router.
Would it work this way?
Thank you!
↧
Re: E4200 Bridged Mode - Wireless and Management fail after 36 hours
I'm having this same issue with the EA4500 in Bridge Mode using a FIOS actiontec router as the main/dhcp. Every couple of days or so, all of my wireless devices lose connection to the EA4500 and the only way for me to fix it is to power cyccle it.
Has there been any solution to this?
↧
WRT 3200 Help
Hi there, I'm hoping I can get some help here. I recently purcahed a WRT 3200 router and I'm trying to set it up with some difficulty. Please note I have no techincal experience so I'm just following the instructions that came with the router.
1. I have turned on the router, connected my internet cable from the wall socket to the INTERNET port on the back.
2. I have selected the network on my wireless laptop and connected to the Linksys' network
3. I have clicked the T&Cs button and then NEXT.
Then I get the following message: 'Your internet cable is not connected correctly'
I can't get past this message and it's very frustrating as this is the same cable I have plugged into my old router and it works perfectly.
Can anybody please help me? Thank you, Nigel
↧
↧
Re: ea9300 just doesn't work. I have tried everything.
So turns out Im still having some issues after the changes above. It seems that web pages still load slowly. the old router was more responsive. Is there any settings that might help? streaming video seems to work well.
↧
Re: AC4000 Parental Controls Not Working
It is occurring on multiple devices(PS4, Roku, Sony Home Theater System, etc). I tried a factory reset, it seemed to work for a few days but doesn't work anymore. I do not manually adjust any settings, except for MAC filtering.
↧
When will Linksys include a OPEN VPN CLIENT in it's firmware?
An Open Vpn Server is all fine and well...
But for MOST people a VPN CLIENT is what is really needed.
Yes yes...You can run DD-WRT, Tomato, Lede. OpenWRT, Gargoyle, etc. etc. etc.
BUT those are not without their issues especially on late model Linksys routers...
They work and you can configure a VPN Provider but often it leaves you without other
parts of your router functioning correctly...
When will Linksys start providing a VPN CLIENT so VPN Providers can implement
and standardize on built-in Router Clients and not Open Source firmware that is
subject to interruptions and non-support if people lose interest in developing firmware
to support a certain x or y router....
This is long overdue.
↧
Re: WRT1200AC all LED blinking simultaneously
If it is brand new, I would RMA it or return it to where you purchased it, that is not something I have heard of before.
↧
↧
Re: WRT 3200 Help
When you say "wall socket", do you mean the ethernet cable plugs into the wall? If so, do you know where that socket goes to? Who is your service provider?
↧
Re: WRT1200AC all LED blinking simultaneously
Hi,
After a long troubleshooting exercise I found that the power supply was faulty. In fact, the faulty power supply had its no load output of 14VDC instead of the expected 12VDC.
Luckily I had another faulty E3000 router with a functioning power supply so, I replaced the faulty power supply with an old one with almost similar specs (12VDC / 2.0A).
The Linksys support team told me that I could return the router but because it's a faulty power supply I decided not to.
Regards.
↧
Re: WRT 3200 Help
Hi there, I mean the socket on the wall where I had my old router plugged in. I'm guessing this socket is wired to the box outside my house that brings a phone line in. My service provider is eir.
↧
http://amazfitpace.org/alpha-muscle-complex/
Alpha Muscle Complex suit schematics are shown in Figure. The muscle suit’s mechanical structure must work smoothie with user movement. Assuming shoulder movement has DOF and the center of rotation changes with arm positioning, as a result, the shoulder movement becomes complicated. Thus we developed the special structure enabling shoulder movement as lustrated using DOF for the shoulder orthogonal axes for rotation and a side. Passive siding foods changes in the center of shoulder rotation. The support torque of shoulders and elbows are Nm, and the waist is Nm. Figure Suit schematics. Near...
↧
↧
E1200 as Ethernet/Wireless Bridge
I have a Linksys EA2700 as main router.
I want to put another router on the other floor of the building to extend Ethernet and Wireless.
I want to buy E1200 to act in Bridge mode. (and connect to EA2700 with ethernet cable)
This document says it is possible https://www.linksys.com/us/support-article?articleNum=143751
As I understand it will delegate everything about Ethernet addresses to main EA2700 router.
And it will make another Wireless connection of its own (it's fine by me), which would get the addresses from the ES2700 main router.
Would it definetely work this way with E1200?
Or should I buy other model, if E1200 doesn't have a standard firmware with Bridge mode available.
Thank you!
↧
http://needsupplementhelp.com/luxure-cream/
Luxure Cream Also, people who have very sensitive skin to changes in temperature from cold to heat and vice versa, which are manifested by the contact of the skin with environments of powerful heating, should always use specific creams for sensitive skin.Spring: Photo protection, hair removal, reducing treatments
In the early temperate months it is essential to use photo protectors every day, even if you do not go to the beach, and prepare the skin to the maximum to counteract the negative effects of the ultraviolet rays of the sun....
↧
Re: EA9500 Stuck in Reboot
Update. The 2nd replacement unit arrived last Wednesday. It was in partial use (WAN plus a Macbook Air connected wirelessly) for 3 day. On Saturday, I restored the configuration and put it into full use. So far so good. Crossing my fingures that this holds up over the long haul.
I do want to take time to compliment the Linksys Support team. The replacements went as smoothly as they could, and I was not forced to spend hours on the phone doing needless troubleshooting. They actually listened to all the troubleshooting steps I had done before calling and did not robotically make me do them all over again. After a few simple checks, they were satisfied that the unit was defective.
↧