I returned the router. Bought more expensive model. Now everything is fine.
Seems the same problems appears on cheap TP-Link routers when they are hardly used for a while. 1 year or more. Some tranzistor cold connection, wearing out or whatewer.
↧
Re: EA7500 Internet connection drops periodically
↧
Re: How to make "LINKSYS" LED stop blinking(EA8500)
Put the black tape on it 
↧
↧
Re: How to make "LINKSYS" LED stop blinking(EA8500)
Linksys won't happy about it. ^^
↧
Re: Settings for EA8500 router
I changed the settings to those you suggested, except for wireless 2.4 protocal - there is no "g/n only" option, so I changed it to "N only."
The only device that I am still having reconnect issues with is the PS3. I have gone throught the network connection options on the PS3 many times, but I still can't get it to connect.
↧
Re: Settings for EA8500 router
mikes23 wrote:
The only device that I am still having reconnect issues with is the PS3. I have gone throught the network connection options on the PS3 many times, but I still can't get it to connect.
The PS3 should connect just like the other devices. Have you deleted the previously saved network settings on the PS3?
↧
↧
Re: EA7500 V1 New Firmware via Router-Not Posted @linksys
Still no release notes for 1.1.3.181750 yet. Did they accidentally release something that they didn't mean to?
↧
Re: AC4000 Parental Controls Not Working
WE have the same issue with the AC4000. The parental controls do not work for blocking internet access at certain times. We try to block our childs ipod and ipad from bedtime till morning. No luck with any of them. Had no issues with our netgear nighthawk with this process. Waste of $300
↧
Re: WRT3200ACM
I renamed my WRT3200ACM piece of **bleep** router! Worst router I've ever purchased!!!
↧
Re: WRT1200AC - Official Supported External Storage List?
Hi buddy Im looking for expert´s advice I have a wrt1200ac and I using a unbrand chinesse 2.5 case and a 500GB disk without issues and enjoy the hi bitrates of writng and reading io. I wanted to move to
1 an external raid enclosure with 2 ,3.5 disk of 2TB hitachi 7200RPM (usb 3.0 and esata)
Vantec Dual 3.5-Inch SATA to USB 3.0 and eSATA with JBOD/RAID 0/1 External Hard Drive Enclosure (NST-400MX-S3R)
or
2 a NAS disk like qnap or sinology (gigabit port) i guess here wont be a issues
are you guess if the router will support raid enclousers, I want this to reuse disk when I upgrade disk.I will start with a 2TB disk and a 750GB disk , later will replace the 750GB mayb for a 3TB in JBOD mode, have you information if the wrt1200ac will or wont support this kind of disk (inside a raid enclouser)?? thks in advance
↧
↧
9500 Router
How can I tell what band I am on
↧
Re: 9500 Router
You could look in the Network Map or have separate SSIDs' for the 2.4Ghz and 5Ghz.
↧
Re: 9500 Router
Thank You, I am new at this and 70 years old. I just got it hooked up last night.
↧
Re: DSL to Cable switch is causing very odd behavior
Firmware is up to date. Not sure how to reupload the firmware. This is actually at a clients house, so I will take note to reupload the firmware. Any other ideas or things to check?
↧
↧
Re: EA7500 V1 New Firmware via Router-Not Posted @linksys
IOActive Security fix is likely one item addressed. See V2 release notes as this was fixed on V2.
Linksys claims 2118 error is new to EA7500, this is not true. It started with prior firmware before this phantom release. Engineering has no fix, they offered me a new EA9300 in exchange. They do now admit it is not a new issue to the V1 EA7500. They also stated this new release should fix the 2118, well gee it did not.
I hope the EA9300 V1 does not produce this error for me. I get it Friday, I will post setup results!
↧
Re: Linksys EA9300 there is no more information about upcoming features?
Something tells me this is not happening. Typical promises and typical failure @linksys-belkin.
↧
Re: WRT54G2 V1 Firmware Upgrade Issue
For anyone reading this thread in the future. I found the link to a WRT54G2 1.0.04 driver on Linksys official website (along with a whole lot more)
https://www.linksys.com/us/support-article?articleNum=208638
And for what its worth the checksum for the one on linksys was the same as the one on dd-wrt.
↧
Re: Linksys E8400 lost 5G radio after one week
What do you base your suggestion on?
↧
↧
E8400 5G connectivity
Has Linksys acknowledged this router's issues with dropping 5G connectivity? This happens every few days to me. Only a reboot will restore it. I think it's well past time for a firmware upgrade if that will even fix it. If not, then some kind of replacement program is needed.
↧
Re: WRT 1200 AC Dropping internet every 15 minutes.
Hi,
I have had exaclly the same issue. First I thought that this is problem at my ISP. After a few phone calls and checks they said that problem is not on their side. I admit that I did not belive them.
After two months or more, I started to search issues on my "new" router and then I also installed dd-wrt (version 33006) on my Linksys WRT1200AC.
And now router works as it should. No more internet dropping.
I hope this will help you.
Br,
Tomaz
↧
EA7500 V2 fails to connect to IPTV (UDP)
Hi,
Had get this device to replace ZyXEL Keenetic. After few days experiments so far didn't find how to make it pass IPTV.
IPTV adresses used by my provider:
udp://@239.1.6.104:11111 udp://@239.1.6.60:33328 udp://@239.0.2.10:11112 udp://@239.1.6.6:44328
etc. (four ports).
VLC on Debian is used to watch IPTV for a long time, no any problems so far.
https://community.linksys.com/t5/Wireless-Routers/E3200-amp-Multicast-IGMP-IPTV/td-p/472836 doesn't helped.
PPTP. IPTV + Internet via LAN + Powerline. WiFi is OFF.
↧