Quantcast
Channel: All Wireless Routers posts
Browsing all 49766 articles
Browse latest View live

Re: EA 4500 slow upload and download speeds

Bingo!  Media Prioritization was the culprit for throttled speeds on my EA4500. Followed SuspededFate's recommendation to check/disable Media Prioritization. Direct connect to my Motorola SB6141...

View Article


Re: Out of Range WRT54GS2 v1

It's WPA2.  Where do I go to change those settings and/or channels, to the "numbered " router Internet setup address?  Thanks.

View Article


Re: Out of Range WRT54GS2 v1

Never mind.  I found the settings.  It's WPA2 Personal security, by the way.  It was already set to Manual and I tried those different channels also. I also tried the Mixed, B Only, and G Only network...

View Article

Re: Can not login to my EA4500 router's web based setup page

I am adding additional information to my "Can not login to my EA4500 router's web based setup page".I get this message displayed when I attempt to display my EA4500 router's web based setup page. This...

View Article

Re: Can not login to my EA4500 router's web based setup page

Hello-Thanks to both of you.I will need more information on the procedures that both of you presented.How do I reboot a router? The setup page does not like any of my browsers.Do you think performing...

View Article


Guest Access w/ Cascade BEFSR41 V3 (Main) and E1000 V1 (Secondary)

Guest Access is setup on my E1000 router and then I cascaded the E1000 with the main router.  Cisco Connect doesn't work after the E1000 was cascaded and it doesn't appear that Guest Access is not...

View Article

Re: Using Parental Controls or Filters how do I block the YouTube app on...

I have turned YouTube off on my kids iPod and iPad using Restrictions on each...outside of the router.

View Article

Re: Guest Access w/ Cascade BEFSR41 V3 (Main) and E1000 V1 (Secondary)

In order to get the features you want a different setup will be needed. Setup the E1000 as your main router and cascade the DEFSR41 in a "LAN to LAN" configuration. Example post below: Using WRT54G as...

View Article


Re: EA 6500 parental controls not working

Reserve an IP Address for the computer in DHCP. Make sure you have the right MAC address of the computer. If the computer has wireless then you will need to reserve a second IP Address for that...

View Article


Using the EA 6300 as an Access Point?

I have given up on getting the EA6300 to work the way I wanted it and will get another router. In order to not be out of pocket for a piece of plastic and electronics in the dumps, I was thinking of...

View Article

Re: Using the EA 6300 as an Access Point?

Check out the post listed below.Example post below:Using WRT54G as second wireless with E2500

View Article

Re: Can't access myrouter.local online anymore

myrouter.local/signin myrouter.local/signout

View Article

Re: Infinite loop trying to associate Smart Wi-Fi account with router

I've reset the router but I cannot get to http://192.168.1.1 => it still tries to go through linksyssmartwifi.com with a redirect to 192.168.1.1 (sorry, I don't have a screenshot at hand).

View Article


WRT54G2 V1 as second router wirelessly to first router.

I bought an Asus RT-ACC66U (in the back room with cable modem) and want my WRT54G2 V1 in the living room with TV, Xbox 360, surround Sound Stereo, and HTPC computer connected by wire.  But I need to...

View Article

Re: Infinite loop trying to associate Smart Wi-Fi account with router

Did you use the recessed button the one you need a pin for?You have to hold it down for 30 seconds

View Article


Re: Infinite loop trying to associate Smart Wi-Fi account with router

Also disconnect the modem for first configuration.

View Article

Re: Infinite loop trying to associate Smart Wi-Fi account with router

Yep, I've reset with a paper clip and hold it down for 60 seconds.

View Article


Re: Infinite loop trying to associate Smart Wi-Fi account with router

> Also disconnect the modem for first configuration.What do you mean, exactly?Thanks!

View Article

Re: Infinite loop trying to associate Smart Wi-Fi account with router

Unplug the cable from the Internet port when you first try to login and after you choose manual configuration then plug it back in.

View Article

Re: Infinite loop trying to associate Smart Wi-Fi account with router

Yeah, I tried that, but couldn't get to 192.168.1.1 regardless. I'll try again. This doesn't make any sense though.

View Article
Browsing all 49766 articles
Browse latest View live